Description
TURBO M-TAP FOR USE WITH A MAGNETIC DRILL WITH REVERSE OR AN IMPACT WRENCH USING JEI’S IMPACT SOCKET ADAPTORS
The Turbo M-Tap can be used directly in any magdrill with reverse for tapping through holes
The Turbo M-Tap can be used with an impact wrench using our impact socket adaptor (available on 1/2″ and 3/4″ drive) up to a maximum depth of 12 mm.
The Turbo M-Tap’s are available as a handy five piece set including tap sizes M8, M10, M12, M16 & M20 including both a 1/2″ & 3/4″ impact socket adaptor to enable the user to tap through holes with either a magdrill with reverse or an impact wrench
A one piece drilling and tapping solution saving the customer both on cost and time. Requires a pilot hole.
- Feature a 19 mm shank to fit straight into cutter arbor
- Ideal for JEI models HM50T and HM100T
- For through holes only
- Available in sizes ranging from M8 – M30
Our tap holders are a cost effective solution for using DIN376 type taps directly in any magnetic drilling machine with reverse, to tap pre-existing holes.
- Feature a 19 mm shank to fit straight into the cutter arbor
- Ideal for use with JEI models HM50T and HM100T
- Designed to suit standard DIN 376 type taps
- Inexpensive option to suit existing taps
- For through holes only
- Available in sizes ranging from M8 – M30
The Turbo M-Tap’s are available as a handy five piece set including tap sizes M8, M10, M12, M16 & M20 including both a 1/2″ & 3/4″ impact socket adaptor to enable the user to tap through holes with either a magdrill with reverse or an impact wrench
